IronWood Firewood Bundler

IronWood Firewood Bundler

$835.00

The IronWood is a hand-crank firewood bundler, Amish-built in Michigan from heavy-duty steel. Load 6–8 split logs about 16″ long, turn the crank, and 12″ stretch wrap winds around the stack to make a tight, carry-ready bundle. No electricity needed.

It’s built for roadside stands, campgrounds, and homesteaders who want clean, retail-ready bundles without paying for an electric machine.

More Information on IronWood Firewood Bundler

Key Features

Why Sellers Choose the IronWood Manual Firewood Bundler

Heavy-duty steel, built in Michigan

The frame is heavy-duty steel with a chain-driven crank, built by Amish craftsmen in Michigan. It’s made for daily use at a stand or woodlot, season after season.

No power, no motor, no maintenance

Because it’s hand-cranked, you can bundle anywhere: in the woodlot, at the stand, or at a campground with no outlet nearby. You control how tight each wrap goes on.

Consistent, retail-ready bundles

Load 6–8 splits about 16″ long and wrap 4–5 times for a uniform bundle that stacks neatly and carries easily. Bundled wood typically sells for more than loose wood; see how many bundles you get from a cord and what to charge per bundle.

Uses standard 12″ stretch wrap

The IronWood takes common 12″ stretch wrap, often called firewood shrink wrap. We sell stretch wrap by the case, plus a bundler loading tray that speeds up loading. Read more on why wrapping firewood works best.

Who the IronWood Is For

Manual vs. Electric Firewood Bundlers

Electric bundlers wrap faster and suit high-volume operations, but they cost more and need power. A manual bundler like the IronWood costs less, works anywhere, and fits most stands, campgrounds, and small businesses. Compare the options in 4 types of firewood wrapping equipment.

How To Use

How to Use the IronWood Firewood Bundler

The IronWood is a hand-crank firewood bundler: load split wood into the frame, turn the crank, and stretch wrap winds around the stack to make a tight, carry-ready bundle. No electricity needed.

What You’ll Need

  • IronWood Firewood Bundler
  • 12″ roll of stretch wrap (often called firewood shrink wrap)
  • Split firewood, about 16″ long

Step-by-Step Instructions

  1. Set up the bundler on a stable, flat surface.
  2. Load the wrap: put the 12″ roll on the holder, tighten the tensioner nut so the wrap stretches as it goes on, and pull out enough to start.
  3. Load the wood: lay 6–8 split logs (about 16″ long) in the frame, stacked neatly.
  4. Wrap the bundle: tuck the end of the wrap under the first log, then crank. 4–5 full wraps usually holds a bundle tight.
  5. Cut and seal: tear or cut the wrap from the roll and press the loose end firmly onto the bundle.
  6. Remove the bundle and check that the logs are held snugly.

Tips for Best Results

  • Use dry, seasoned wood for the tightest bundles.
  • Keep the wrap taut on every pass.
  • Adjust the log count for bundle weight; 6–8 splits makes a standard retail bundle.

Frequently Asked Questions

What is a firewood bundler?

A firewood bundler holds split firewood in a frame while stretch wrap is wound around it, making a tight, uniform bundle for sale or storage. The IronWood is a manual bundler: you turn a hand crank and a chain-driven arm wraps the stack.

How much does the IronWood firewood bundler cost?

The IronWood is $835, plus freight shipping based on your region. Shipping rates are listed on our shipping policy, and local pickup is available in Hudsonville, Michigan.

Should I buy a manual or electric firewood bundler?

Electric bundlers wrap faster and suit high-volume operations, but they cost more and need a power source. A manual bundler like the IronWood costs less, works anywhere, and fits most roadside stands, campgrounds, homesteads, and small firewood businesses.

What size wrap does a firewood bundler use?

The IronWood uses 12-inch stretch wrap, which many sellers call firewood shrink wrap. We sell stretch wrap by the case.

How many pieces of firewood go in a bundle?

Six to eight split logs about 16 inches long make a standard retail bundle in the IronWood. Four to five full wraps hold the bundle tight.

How many bundles of firewood are in a cord?

A full cord yields roughly 128 standard bundles, depending on bundle size and how tightly the wood is stacked. See how many bundles are in a cord for the math.

Does the IronWood need electricity?

No. The IronWood is hand-cranked, so you can bundle in the woodlot, at a roadside stand, or at a campground with no outlet nearby.

Where is the IronWood made?

The IronWood is built by Amish craftsmen in Michigan, USA, from heavy-duty steel.

How long does shipping take?

Each bundler is made to order, so allow up to 3 weeks before it ships. It ships by freight within the continental U.S., and you will need a way to unload a pallet on delivery.

Can I return the bundler?

Yes. Unused items can be returned within 30 days of purchase. Return shipping is paid by the customer unless the product is defective. See our return policy.

Reviews

There are no reviews yet.

Be the first to review “IronWood Firewood Bundler”

Your email address will not be published. Required fields are marked *

Related Products

Price range: $225.00 through $425.00